河北警察职业学院-论语六则原文

14

25AP ( MICRO-CHISEL)


25AP is the replacement chain for small imported saws originally equipped with
14
FEATURES:
·Micro-ChiselR cutters have small-radius working corners that cut fast and are
easy to sharpen
·Small size and light weight make 25AP easy to use and highly maneuverable

.325

20, 21, 22BPX (MICRO CHISEL)


Smoothness combined with high cutting performance makes this a versatile
member of the OREGON chain family. As easy to maintain as chipper chain, but with
greater cutting capability.
FEATURES:
·Advanced grind geometry
·Significantly enhanced out-of-box sharpness. No more sharpening prior to
use. No more “Lowering th Rakers” prior to use

·Dramatic improvements in BPX vs. BP chain performance
·Make bias cuts up to 18% faster and a 13% improvement in nose clear and
nose buried bucking cuts.
·Feel the hunger of BPX chains while lessening your workload due to at least
a 20% increase in cutting efficiency.
· Extreme cutting efficiency, less feed force required
· Improved fuel economy
·Blued cutters
· Superior corrosion resistance
· Base-cutter hardness consistency
· Improved strength
·Micro-Chisel cutters small radius working corners for fast cutting and easy
sharpening
·LubriLink tie straps More oil stays where it’s needed: on the chain
·Lubriwell drive links More oil stays where it’s needed: on the chain
·Top-plate witness mark Sharpening is easy and consistent, every time and
serves as end-of- life indicator
·Vibe-Ban Reduces vibration 25% or more at the saw handle compared to
chains without vibration reduction features.

20, 21, 22LPX (SUPER 20)


The high-performance chain for professional woodcutters who use .325
saws.
FEATURES:

·Advanced grind geometry
·Significantly enhanced out-of-box sharpness
·Dramatic improvements in LPX vs. LP chain performance
·Make bias cuts up to 17% faster and experience a 10% improvement in
nose clear bucking cuts.
·Feel the hunger of LPX chains while lessening your workload due to 18%
increase in cutting efficiency
· Improved fuel economy
·Blued cutters
· Superior corrosion resistance
· Base-cutter hardness consistency
· Improved strength
·Bumper drive links Help reduce kickback
·LubriLink tie straps More oil stays where it’s needed: on the chain
·Lubriwell drive links More oil stays where it’s needed: on the chain
·Top- plate witness mark Sharpening is easy and consistent, every time and
serves as end-of- life indicator
·Vibe-Ban Reduces vibration 25% or more at the saw handle compared to
chains without vibration reduction features
·Chisel Cutters
·Maximum cutting efficiency
·Most aggressive performance.

95VPX Micro-Lite

95VPX chain is part of a Micro-Lite narrow-kerf cutting system that requires less
power from the saw to cut than standard cutting systems and meets the ANSI
low-kickback standard.
FEATURES:
·Advanced grind geometry
·Micro Chisel cutters have small-radius working corners for excellent
performance and ease of maintenance
·Always install 95VPX chain on a Micro-Lite bar ( ML, MP or MG part numbers )
to obtain all the advantages built into the Micro-Lite system
·Patented Chain Steel - OREGON OCS-01 steel is patented and provides
greater durability, especially in cold cutting conditions.
·Lubri Link : tie straps help keep oil where it's needed- on the chain
·Lubriwell : oil holes help carry oil around the full length of the guide bar's
groove.
·Vibe-Ban : chassis design reduces vibration 25% or more at the saw handles

38

91VXL (LOW PROFILE)


This new cutting chain features a longer top plate, an aggressive cutting edge and a
forgiving sharpening profile.
FEATURES:
·Long cutter top plate
·33% longer than standard 91 cutters

·Enhanced value
·Advanced grind geometry
·Improved out-of-box grind
·High performance in all cutting modes
·Extreme cutting efficiency, less feed force required
·Blued cutters
·Superior corrosion resistance
·Base-cutter hardness consistency
·Semi-Chisel cutter
·Aggressive cutting edge with a forgiving sharpening profile and good
stay-sharp
·Less vibration than most competitive chains
·Vibe-Ban reduces vibration 25% or more at the saw handle
·LubriLink tie straps
·Help keep oil where it's needed ,on the chain
·Directs oil to the critical rivet flangehole interface
·LubriWell oil holes
·Help carry oil around the full length of the guide bar's groove
·Enhances lubrication of the bar nose sprocket and bearings

72, 73, 75JPLPX (SUPER 70)

Historically the world's best-selling family of professional chains.
FEATURES:
·Top-performing square-corner
a single pass
·Bumper drive links help reduce kickback
·
·LubriLink tie straps help keep oil where it's needed - on the chain
·Top-plate witness mark makes accurate sharpening easier
·Vibe-Ban reduces vibration at the handles by 25% or more

72, 73, 75JGLGX (SUPER GUARD, round-ground chains)


72LGX,73LGX, and 75LGX(38”-pitch Super Guard) saw chains feature new
Stabl-Link drive links and precision ground blued cutters. Stabl-Link dramatically
improves performance and increases cut precision. The cutters have an advanced
grind geometry that is “work ready”. This series saw chain is only for professionals
who demand saw chain that delivers high- performance, resists stretch, is simple to
maintain, provides long life, and is consistent from loop to loop.
FEATURES:
·Advanced grind geometry
·Significantly enhanced out-of-box sharpness
·Dramatic improvements in boring and bias modes
·Extreme cutting efficiency, less feed force required
·Revolutionary Stabl-Link drive links
·Stability in the cut

·Exceptional cut precision
·Increases nose and drive sprocket life
·Reduces bar rail wear
·Blued cutters
·Superior corrosion resistance
·Base-cutter hardness consistency
·Tumbled parts
·Smooth finish
·Improves joint articulation, combats tight joints
·Offset ramp-shaped depth gauges
·Offset reduces roughness, helps prevent cutter from diving into the sidewall
of the cut
·Ramp-shape reduces kickback energies without affecting performance
·Clean ground gullets
·Increases chip flow, less chain clogging
·No out-of the box filing needed
·Long, high-strength cutter top plate
·Resists breakage
·Longer cutter life
·Top- plate-angle witness mark Sharpening is easy and consistent, every time
and serves as end-of- life indicator
·LubriLink tie straps More oil stays where it’s needed: on the chain

72, 73, 75DP; 72AP(S-70)

The chain that made lightweight saws possible.
FEATURES:
·Round-cornered
sharpening errors (typically) than most cutter types
·Bumper drive links help reduce kickback
·Excellent performance in dusty or dirty conditions
·LubriLink tie straps help keep oil where it's needed - on the chain

91PX Consumer Saw Chain


A high-performance, low- kickback chain well suited for commercial cutters,
arborists and occasional users.
FEATURES:
·Advanced grind geometry : Enhanced grind geometry signifi cantly improves
out-of- box sharpness with substantial speed improvement in boring and bias
(undercut) modes.
·Bumper drive link
·Reduces kickback without sacrifi cing performance
·Meets ANSI B175.1 standards for low-kickback saw chain
·Chamfer : Twin cutting corners offer outstanding performance, durability and
easy maintenance

·Lubri Link : Tie straps help keep oil where it’s needed – on the chain
·Lubri Well : Oil holes in the drive links help carry oil around the full length of the
guide bar groove.
·Vibe-Ban : Chassis design increases operators’ comfort level by reducing
vibration at the handles.

91P Chamfer Chisel (XtraGuardR)


91P is a low-kickback low-vibration chain with twin-cornered Chamfer Chisel cutters,
notched bumper drive links and an easy-to-service chassis with symmetrical tie
straps.
FEATURES:
·Round- cornered
sharpening errors (typically) than most cutter types Chamfer Chisel cutters have an
angular shape with twin cutting corners that offer outstanding performance along
with durability and easy forgiving maintenance comparable to round-cornered
chains
·Patented notched bumper drive links deliver low- kickback performance while
providing clearance for excellent chip flow (U.S. Patent No. 2)
·Four-way symmetrical tie straps make assembly fool-proof, there’s no way to
position a 91P tie strap incorrectly.

90PX Low- kickback, Narrow-Kerf Chain

90SG chain is an improved Low-kickback, Narrow-Kerf Chain for Micro-Lite Cutting
Systems.
FEATURES:
·Micro-Lite narrow-kerf
·Less power is required to make the same cut (as compared to 38
profile .050
·Always use 90PX on a Double Guard .043
obtain all the advantages of the Micro- Lite system.
· Bumper drive link
·Reduces kickback without sacrificing performance
·Meets ANSI B175.1 standards for low- kickback saw chain.
· Chamfer
·Outstanding performance, fast and efficient cutting
·Excellent stay-sharp.
· LubriLink
·help keep oil where it's needed - on the chain
·Directs oil to the critical rivet flangehole interface
·LubriWell
·help carry oil around the full length of the guide bar's groove

·Witness
·Provides a visual guide to better maintain a proper filing angle
·Vibe-Ban
·reduces vibration 25% or more at the saw handles

72, 73, 75V (VANGUARD)


The new shape of speed, performance, and safety makes Vanguard a chain for
professional, commercial, or occasional use. OregonR Vanguard equals or beats
competitive chains, and our own popular 72LG, in nose-clear bucking, nose-buried
bucking and boring - while also meeting the ANSI low-kickback standard.
FEATURES:
·Wide-track depth gauge makes the remarkable combination of fast cutting,
smooth operation and low- kickback performance possible
·Available exclusively from Oregon
·LubriLink tie straps help keep oil where it's needed - on the chain
·Top-plate witness mark makes accurate sharpening easier
·Vibe-Ban chassis design reduces vibration 25% or more at the handles

.404

68LX

68LX is a big-timber chain for cutting clean wood with kickback-reducing
ramp-shaped depth gauges.
FEATURES:
·Advanced grind geometry
·Woods ready out of the box
·Great results in all cutting modes
·Extreme cutting efficiency, less feed force required
·Blued cutters
·Superior corrosion resistance
·Base-cutter hardness consistency.
·Tumbled parts
·Smooth finish.
·Improves joint articulation, combats tight joints
·Thinner cutter More efficient, easier filing.
·LubriLink tie straps More oil stays where it’s needed: on the chain.
·Top-plate witness mark Sharpening is easy and consistent every time and
serves as end-of- life indicator.

58, 59JL (SUPER GUARD, round ground chains)


A big-timber chain for cutting clean wood with kickback- reducing ramp-shaped
depth gauges.
FEATURES:

·Top- performing square-corner
a single pass
·Ramp-shaped depth gauges help reduce kickback without the weight or bulk of
bumper drive links of tie straps
·LubriLink tie straps help keep oil where it's needed - on the chain

27, 27A (MICRO-CHISELR)


A heavy-duty high-performance chain for professional users of large saws who
prefer the durability and easy maintenance of small- radius Micro-ChiselR cutters.
FEATURES:
·Micro-ChiselR cutters feature small-radius working corners for fast cutting,
edge-holding durability and easy sharpening
·LubriLink tie straps help keep oil where it's needed - on the chain

58, 59CP (MICRO- BITR)


The big-timber chain for woodworkers who prefer fully rounded
cutters.
FEATURES:
·Micro-BitR cutters feature fully rounded working corners and side plates
(similar to 11BC) for excellent performance, easy sharpening, and edge-holding
durability

·Particularly effective in cutting hardwoods
·LubriLink? tie straps help keep oil where it's needed - on the chain

27R


27R is a specialty ripping chain, features a special factory grind for making
dimensional boards and planks from larger timbers by “ripping” (cutting parallel to
the wood grain).
FEATURES:
·Standard chassis and cutter parts are used; cutter grind is the only difference
from standard chains.
·For use on chain-type sawmills; not recommended for hand-held use
·Four-way symmetrical tie straps make assembly fool-proof, there’s no way to
position a 91P tie strap incorrectly
·LubriLink tie straps help keep oil where it’s needed – on the chain.
·Patented steel, with greater durability, especially in cold conditions for
excellent performance and easy sharpening
·LubriWell oil holes help carry oil around the full length of the guide bar’s groove

38

90SG (Micro-Lite)

90SG chain is part of a Micro-Lite narrow-kerf cutting system that requires less
power from the saw to cut than standard cutting systems.
FEATURES:
·90SG is a low-kickback chain
·Low-vibration chamfer-chisel cutters have an angular shape with twin cutting
corners for excellent performance and edge-holding durability
·Narrow .043
approximately 15%
·Always install 90SG chains on a .043
to obtain all the advantages of the Micro-Litesystem. 90SG chain does not fit .050
gauge bars intended for 91-series chains
·LubriLink tie straps help keep oil where it's needed - on the chain
·Top-plate witness mark makes accurate sharpening easier
·LubriWell oil holes help carry oil around the full length of the guide bar's groove
·Vibe-Ban chassis design reduces vibration 25% or more at the handles

.325

95VPX (Micro-Lite)


95VPX is part of a Micro-Lite narrow-kerf cutting system that requires less power
from the saw to cut than standard cutting systems.
FEATURES:
·95VPX is a low-kickback chain
·Micro-Chisel cutters feature small-radius working corners for excellent
performance and easy sharpening

·Always install 95VPX chain on a Micro-Lite bar (ML or MP part numbers) to
obtain all the advantages built into the Micro-Lite system
·LubriLink tie straps help keep oil where it's needed - on the chain
·LubriWell oil holes help carry oil around the full length of the guide bar's groove
·Vibe-Ban chassis design reduces vibration 25% or more at the handle
Ripping Chains for Professional Use

72, 73, 75RD; 27RRA; 95R (RIPPING CHAINS)


These chains feature a special factory grind for making dimensional boards and
planks from larger timbers by
FEATURES:
·Standard chassis and cutter parts are used; cutter grind is the only difference
from standard chains
·For use on chain-type sawmills; not recommended for hand-held use
·LubriLink tie straps help keep oil where it's needed - on the chain

91LX (POWER-SHARP)


Power- Sharp is the chain for saws equipped with automatic chain-sharpening
systems.
FEATURES:
·Meets the ANSI low- kickback standard

·Ideal for less-experienced users, or for cutting in abrasive
conditions
·LubriLink tie straps help keep oil where it's needed - on the
chain
·Vibe-Ban chassis design reduces vibration 25% or more at
the handles





Guide Bars for Occasional Use
OCCASIONAL USE BARS: These bars are ideal for homeowners, campers or hunters
who use a chainsaw. They come with sprocket noses of professional quality and
smaller- radius noses to help reduce the risk of bar-nose kickback. The bars are light
weight, maneuverable, and reversible for long life. Most of the world's consumer
saw makers equip their units with these bars as original equipment.

MICRO-LITE™ AND MICRO-LITE™ INTENZ® BARS


It takes less power from the saw to make the same length of cut with a narrow-kerf
barchain cutting system than with a standard bar and chain. Micro-Lite™ is the bar
for occasional woodcutters who want the advantages of a narrow-kerf cutting
system.
·Professional-quality steel material for strength, durability, and resistance to
wear.
·Thickness of side laminates is reduced to work with narrow-kerf chains .

·Available in models with the Intenz® tensioning mechanism built into the bar
itself.
Note 1: Micro-Lite™ bars are available in two gauges: .043
with 38
with .325
Note 2: Always install a Micro-Lite™ bar together with a Micro- Lite™ chain in order
to obtain all the advantages built into the Micro-Lite™ narrow-kerf cutting system.

DOUBLE GUARD® 25 BARS


The bar for consumers who prefer using small saws. Designed exclusively for use
with our 14
for extended life. Available in 12
·Reduced-kickback small-radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

DOUBLE GUARD® .325

Delivers great performance in a reduced-kickback bar for users who prefer
medium-size saws and professional-type .325
our 38
·Reduced-kickback small- radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil- retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Available in models with the Intenz® tensioning mechanism built into the bar
itself
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

DOUBLE GUARD® 38


The ideal combination of safety and performance is available in these
reduced- kickback bars designed for use with 38
Features a slim shape for low weight, small-radius reduced- kickback nose and
professional quality nose sprocket and bearings. Symmetrical contour, reversible
for longer life.
·Reduced-kickback small-radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*

* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

DOUBLE GUARD® 91 AND DOUBLE GUARD® 91 INTENZ® BARS


Simply the best bar available for consumer chainsaw users. Recommended for use
with electric and small gasoline-powered saws. Same great features as our 38
Double Guard® bar.
·Reduced-kickback small-radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Available in models with the Intenz® tensioning mechanism built into the bar
itself
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.



Guide Bars for Professional Use
PROFESSIONAL USE BARS: We manufacture the most complete line of chainsaw
guide bars for professional loggers. They fit nearly every professional saw used
worldwide. The bars are made with replaceable sprocket noses that can be changed
in the field if the nose breaks in an accident. Our Laser-Tip solid-nose bars are the
best available for cutting in abrasive conditions. Our bars also feature Lubri Jet®
oiling holes, ultra-high-strength alloy material, and precision manufacturing. A wide
choice is available to the professional woodcutter to suit every cutting need.

OREGON® PRO BARS


The ultimate guide bar for professional cutters. All the benefits of our Power Match®
bar plus extra features big timber cutters want. Blended nose and body surfaces
reduce bar thickness for less binding in kerf.
·All the basic features of our popular Power Match®, along with:
·Blended nose-body surfaces and reduced thickness to minimize hang-ups
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Lubri Jet® oil holes reduce oil-hole plugging and enhance bar-chain
lubrication*
·Patented Cradle™ nose sprocket design increases sprocket- nose life by 150%
to 300%
·Square, polished rails minimize chain leaning; visibly superior quality
* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

POWER MATCH® PLUS DOUBLE GUARD® BARS


For professional cutters who want fast, easy nose replacement with maximum
strength. Features a single-rivet nose fastening system and wide, overlapping ears
for solid nose-body attachment. Available in standard-size replacement nose or
small-radius, reduced-kickback Double Guard® nose. Specially designed Lubri jet®
oil hole reduces plugging, extending bar and chain life.
·Small-radius nose reduces kickback and makes it easier to cut in tight places

·Long nose takes most of the abuse, minimizes wear to the body
·Double Guard® noses can replace standard noses with no change in drive-link
count
·Double Guard® replacement noses fit any Power Match® Plus body and fit all
chain gauges (in either .325
·Lubri- Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Lubri Jet® oil holes reduce oil-hole plugging and enhance bar- chain
lubrication*
·Patented Cradle™ nose sprocket design increases sprocket- nose life by 150%
to 300%
* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

POWER MATCH® PLUS BARS


The industry standard for professional users cutting clean wood.
·Nose fastens with a single rivet, and is securely held by wide, strong,
overlapping ears
·Long nose takes most of the abuse, minimizes wear to the body
·Power Match® Plus replacement noses fit any Power Match® Plus body and fit
all chain gauges (in either .325
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil- retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*

·Lubri Jet® oil holes reduce oil-hole plugging and enhance bar- chain
lubrication*
* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

LASER-TIP PLUS SOLID-NOSE BARS


Built for full-time work in tough, abrasive conditions that would quickly ruin
bearings of sprocket-nose bars.
·Ultra-high-strength, wear resistant alloy is laser welded to the nose for long
bar life
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Lubri Jet® oil holes reduce oil-hole plugging and enhance bar-chain
lubrication*
·Laser welding provides a wear resistant alloy bond without weakening the bar
body, as can occur with gas welding
* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

LASER-LITE® SOLID-NOSE BARS


Designed for small- displacement saws used by commercial cutters who prefer a
solid-nose over a sprocket-nose. Endures abrasive cutting conditions better than
sprocket-nose bars due to ultra-high-strength wear resistant alloy around the nose.

·Laminated construction reduces weight and cost while maintaining excellent
performance
·Ultra-high- strength wear resistant alloy is laser welded to the nose for long bar
life
·Laser welding provides the optimum stellite bond without weakening the bar
body, as can occur with gas welding
·Lubri-Dam® oil-retaining feature on
while reducing oil-hole plugging*
* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.



Guide Bars for Occasional Use
OCCASIONAL USE BARS: These bars are ideal for homeowners, campers or hunters
who use a chainsaw. They come with sprocket noses of professional quality and
smaller-radius noses to help reduce the risk of bar-nose kickback. The bars are light
weight, maneuverable, and reversible for long life. Most of the world's consumer
saw makers equip their units with these bars as original equipment.

MICRO- LITE™ AND MICRO-LITE™ INTENZ® BARS


It takes less power from the saw to make the same length of cut with a narrow-kerf
barchain cutting system than with a standard bar and chain. Micro-Lite™ is the bar
for occasional woodcutters who want the advantages of a narrow- kerf cutting
system.
·Professional- quality steel material for strength, durability, and resistance to
wear.
·Thickness of side laminates is reduced to work with narrow- kerf chains .

·Available in models with the Intenz® tensioning mechanism built into the bar
itself.
Note 1: Micro-Lite™ bars are available in two gauges: .043
with 38
with .325
Note 2: Always install a Micro-Lite™ bar together with a Micro- Lite™ chain in order
to obtain all the advantages built into the Micro-Lite™ narrow-kerf cutting system.

DOUBLE GUARD® 25 BARS


The bar for consumers who prefer using small saws. Designed exclusively for use
with our 14
for extended life. Available in 12
·Reduced-kickback small-radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

DOUBLE GUARD® .325

Delivers great performance in a reduced-kickback bar for users who prefer
medium-size saws and professional-type .325
our 38
·Reduced-kickback small- radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil- retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Available in models with the Intenz® tensioning mechanism built into the bar
itself
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

DOUBLE GUARD® 38


The ideal combination of safety and performance is available in these
reduced- kickback bars designed for use with 38
Features a slim shape for low weight, small-radius reduced- kickback nose and
professional quality nose sprocket and bearings. Symmetrical contour, reversible
for longer life.
·Reduced-kickback small-radius nose
·Slim symmetrical contour is light in weight, maneuverable, and reversible for
long life
·Patented Cradle™ nose sprocket design increases sprocket-nose life by 150%
to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*

* Lubri-Dam® and
LubriJet® oiling features
may not be a standard
feature on certain bars
depending on the date of
manufacture of bar type.

DOUBLE GUARD® 91 AND DOUBLE GUARD® 91 INTENZ® BARS


Simply the best bar available for consumer chainsaw users. Recommended for use
with electric and small gasoline-powered saws. Same great features as our 38
Double Guard® bar.
·Reduced-kickback
small-radius nose
·Slim symmetrical
contour is light in weight,
maneuverable, and
reversible for long life
·Patented Cradle™ nose sprocket design increases
sprocket-nose life by 150% to 300%
·Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail,
keeps more oil on the bar and chain*
·Available in models with the Intenz® tensioning mechanism built into the bar
itself
* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on
certain bars depending on the date of manufacture of bar type.

湖南师范大学理学院-初二地理上册知识点

芦荟胶的用法-出国留学中介前十名

女性生理知识-洛神赋原文

孝感职业技术学院-读书的好处和坏处

浙师大成绩查询-呼吁和平

辽宁招生考试办公室-中国合伙人经典语录

感恩父亲的话-井底之蛙的寓意

情人节是几月几日-证券公司佣金排名